ePOWER B TEC Lithium Battery inc AC Charger

$3,750.00$4,942.00

The ePOWER B TEC Lithium Battery inc AC Charger is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.

Brand:

ePOWER B TEC 24v 36v 100Ah Lithium Battery inc AC Charger

Available in 24v or 36v, the ePOWER B TEC Lithium Battery inc AC Charger is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.

The battery is also equipped with an internal Battery Management System which connects to your mobile device via Bluetooth. This can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

Data available via the BMS:

  • Battery Capacity;
  • Battery Voltage;
  • Battery Current (Amps);
  • Battery State of Charge (SOC);
  • Battery State of Health (SOH);
  • Battery Status;
  • Individual Cell Voltage;
  • Battery Temperature;
  • Battery Cycles;
  • Battery Alarms; and
  • Battery Event Information.

Providing 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.

The ePOWER B-TEC battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.

With over 5 years of researching, designing and testing lithium batteries and the associated charging systems, Enerdrive are at the forefront of lithium battery systems in Australia. Enerdrive are the only Australian company that can supply a fully integrated self-branded energy system to suit your setup.

With over 1200 complete systems in operation Australia wide, Enerdrive is regarded as the leader in the field of lithium batteries and energy systems for Mobile, Marine and Remote applications.

Please Note; The ePOWER B-TEC battery is not designed to parallel connect extra batteries to increase the overall capacity. This is due to the internal management system BMS which does not have the ability of physical connection to a second B-TEC BMS system for balancing of the cells between each battery.

Includes all the instructions to install yourself or better yet why not contact us at QME to install it for you correctly, the first time.

Additional information

Voltage

24v inc EPI2430, 36v inc EPI3620